DBD-16L vergalhões bender, Rebar and Mesh, chairs, Stools, caps, Hydraulic,Punches,Punch, Hydraulic Punches,Handy Puncher,Fixing,Fixing Tools,Rebar,Rebar Tools,Cutter,Rebar Cutter, Bender,Rebar Bender,RB515,RB395,RB650A,RB655,DC-25X,DC-25W,DC-20WH,DC-20W,DC-20HL,DC-16W, DC-13LV,DC-16LZ,DC-32WH,DCC-1314,DCC-1618,DBD-25H,DBD-25X,DBD25L,DBD19L,DBD16L,HB-16W, DBR-32WH,DBC-16H,DBC-25X,EP-1406V,EP-1475V,EP-20S,EP-19V,EP-2110V, Reinforced steel, Reinforced steel Supplies, Reinforced steel Suppliers, Bolt Cutters, Concrete Mesh Cutter

Safety Netting / Barrier Netting

Try our scaffolding accessories!

BASE JACKS

COMBI-NUTS

SCAFFOLDING COUPLERS

Orange safety netting, yellow and orange barrier netting

Base jacks, formwork, scaffolding accessories

Combi nuts, Tie nut, formwork, scaffolding accessories

Swivel Couplers, Fixed Couplers, formwork, scaffolding accessories

DBD-16L Rebar Bender, vergalhões bender, bender de vergalhão

Specifications

Weight

20 kilograms

Minimum rebar diameter

8mm rebar

Maximum rebar diameter

16mm rebar

Bending speed

180 degrees in 1.5 seconds

Max. tensile strength

490 N/mm2

Power supply

Single phase main / generator

Voltage

230 Volts

Power input

1050 Watts

Dimensions mm

320 (L) x 350 (W) x 245 (H)

Features

* For on site work and also
   suitable for precast yards.
* Medium duty, robust electrical
   -mechanical bender.
* Two preset angle locks for
   repeating the same angle bend.
* Can be set to accurately bend
   any angle from 0-180 degrees.
* Bends (3) each 10mm rebar,
   (2) each 12mm rebar,
   (1) each 16mm rebar,
   at one time.
* Emergency stop switch.
* Side handles makes it easy
   to carry around.

Includes

Comes with set of six bending
rollers in steel case.

Optional

Stand and Foot switch.

Rebar Processing Equipment and Rebar Accessories
We supply a wide range of rebar processing equipment and accessories, to the rebar processing and rebar placement industries, such as these Rebar Cutters:
1.   DC-16LZ Rebar Cutter - 220V
2.   DC-16W Rebar Cutter - 220V
3.   DC-20HL Rebar Cutter - 220V
4.   DC-20W Rebar Cutter - 220V
5.   DC-20WH Rebar Cutter - 220V
6.   DC-25X Rebar Cutter - 220V
7.   DC-25W Rebar Cutter - 220V
8.   DC-32WH Rebar Cutter - 220V
9.   M26 Rebar Cutter - 380V
10. M36 Rebar Cutter - 380V
11. M45 Rebar Cutter - 380V
12. MG20H Rebar Cutter - 220V

and these Rebar Benders:
1.   DBD-16L Rebar Bender - 220V
2.   DBD-25H Rebar Bender - 220V
3.   DBD-32X Rebar Bender - 220V
4.   B26 Rebar Bender - 380V
5.   B36 Rebar Bender - 380V
6.   B45 Rebar Bender - 380V
7.   MG20B Rebar Bender - 220V

Formwork and Scaffolding Accessories
We also supply formwork and scaffolding accessories, to the Formwork and scaffolding industries, such as:
1.   Base Jack Nuts for Scaffolding
2.   Base Jacks for Scaffolding
3.   Ferrule dollies for light Formwork
4.   Ferrule Jacks for Light Formwork
5.   Swivel Couplers for Scaffolding
6.   Fixed Couplers for Scaffolding
7.   Tie Rods for Formwork
8.   Corner Fillets with lip for Formwork economy panels
9.   Chamfer with lip for Formwork economy panels
10. Plain Chamfer for Formwork economy panels
11. Water Stoppers for Formwork

Veja a vasta gama de acessórios para o vergalhão, cofragem e andaimes que fornecemos para as indústrias de construção, vergalhões, cofragem e andaimes.virola Nós estamos fornecendo acessórios para andaimes como ponteira, nozes jack, gota forjada acopladores, braçadeiras, rod, nozes, etc. Bem-vindo a contactar-nos para cotação, obrigado.